 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Technical Data Sheet Specification SSC-GR202 (Rev 1.0, General) SSC Drawn Approval Customer Approval SSC-GR202 SSCRevision 1.0 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.00) Technical Data Sheet [ Contents ] 1. 2. 3. 4. 5. 6. 7. 8. Absolute maximum ratings Electro-optical characteristics Characteristic diagram Soldering profile Outline dimension Packing Reel packing structure Precaution for use SSC-GR202 SSCRevision 1.0 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.00) Technical Data Sheet SSC-GR202 Description Small size suitable for compact appliances Surface-mounted and leadless chip LED device High brightness, wide variety of colors are available SSC-GR202 Features * 3.0 X 1.5 X 1.4 mm * Inner Lens type, Clear mold * Wavelength : 570 nm Applications Tape and Reel packing Increases the life time of battery * Decoration lighting SSC-GR202 SSCRevision 1.0 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.00) Technical Data Sheet 1. Absolute maximum ratings (Ta=25E ) Parameter Power Dissipation Forward Current Peak Forward Current Reverse Voltage Operation Temperature Storage Temperature Symbol Pd IF IFM *1 VR Topr. Tstg. Value 75 30 50 5 -30 ~ 85 Unit mW mA mA V E E -40 ~ 100 *1 IFM conditions: Pulse width TwA 0.1ms and Duty ratioA 1/10 2. Electro-Optical Characteristics (Ta=25E ) Parameter Forward Voltage Reverse Current Luminous Intensity*2 Wavelength Spectral Bandwidth Viewing Angle*3 Symbol VF IR IV e p eA 2e 1/2 Condition IF=20 I VR=5V IF=20 I IF=20 I IF=20 I IF=20 I Min 1.8 35 568 Typ 2.1 570 20 70 Max 2.5 10 60 574 Unit V E mcd nm nm *2 The luminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. *3 e 1/2 is the off-axis where the luminous intensity is 1/2 the peak intensity. [Note] All products confirm to the listed minimum and maximum specifications for electric and optical characteristics, when operated at 20mA within the maximum ratings shown above. All measurements were made under the standardized environment of SSC. (Tolerance : Iv 3/4 10 %, e D 3/4 2 nm, VF 3/4 0.1 V) SSC-GR202 SSCRevision 1.0 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.00) Forward Current IF(mA) Relative Intensity IV(%) Forward current IF(mA) Technical Data Sheet 3. Characteristic Diagram Forward Current vs Forward Voltage 100 Relative Intensity vs Forward Current 140 120 100 80 60 40 20 1 1.9 10 0 2.0 2.1 2.2 2.3 0 5 10 15 20 25 30 35 Forward Voltage VF(V) Forward Current IF(mA) Forward Current vs Derating Curve 40 Radiation Diagram -2 0AE 0AE + 20AE 30 1. 0 40AE +4 0AE 20 0. 5 60AE 10 +6 0AE 0 -25 80AE 0 25 50 o +8 0AE +9 0AE 75 100 0 AE 9 Ambient temperature Ta( C X SSC-GR202 SSCRevision 1.0 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.00) Technical Data Sheet 4. Soldering profile Reflow Soldering Conditions/ Profile (1) Lead Solder * Preliminary heating to be at 150E * Soldering heat to be at 240E max. for 2 minutes max. max. for 5 seconds max. (2) Lead-Free Solder * Preliminary heating to be at 150E max. for 2 minutes max. * Soldering heat to be at 260E max. for 10 seconds max. (3) Hand Soldering Condition * Not more than 3 seconds @MAX280E , under Soldering iron. [Note] In case the soldered products are reused in soldering process, we don't guarantee the products. SSC-GR202 SSCRevision 1.0 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.00) Technical Data Sheet 5. Outline Dimension Tolerance: 3/4 0.1, Unit: (R) 6. Packing Tolerance: 3/4 0.2, Unit: (R) (1) Quantity: 3,000pcs./Reel (2) Cumulative Tolerance: Cumulative Tolerance/10pitches to be 3/4 0.2mm (3) Adhesion Strength of Cover Tape: Adhesion strength to be 0.1-0.7N when the over tape is turned off from the carrier tape at10 angle to be the carrier tape. (4) Package: P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package. SSC-GR202 SSCRevision 1.0 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.00) Technical Data Sheet 7. Reel Packing Structure le R P / N : ########## ## C|A i : CS RG- 202 Lot N o ########## : (R)*o1/4 03 lyniVmu A gaB PN : # # # # # # # # # # / ## : iC|A SSC-G R202 Lot N o ########## o1/4 (R)* : 0 3 xoB retuO * M a t e r i a l : aP PYT E a ep (r WS B3 B( ) S (EZI b 20 m) c 41 2 i7 cn h c IHC 42 5 DEL P 20 PIHC a L ED b RAP DOC 'Q LO DAT T : S S RG-C E : TY : 03 AE0 , TN E: ES LUO ES O : M I C O N D CU TO RC O .,L T D SSC-GR202 SSCRevision 1.0 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.00) Technical Data Sheet 8. Precaution for Use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in the dry box (or desiccator) with a desiccant. Otherwise, to store them in the following environment is recommended. Temperature : 5E (2) Attention after opened However LED is corresponded SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. After opened and mounted, the soldering shall be quickly. b. Keeping of a fraction Temperature : 5 ~ 40E Humidity : less than 30% (3) In case of more than 1 week passed after opening or change color of indicator on desiccant components shall be dried 10-12hr. at 603/4 5E . (4) In case of supposed the components is humid, shall be dried dip-solder just before. 100Hr at 803/4 5E or 12Hr at 1003/4 5E . (5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. (6) Quick cooling shall not be avoid. (7) Components shall not be mounted on warped direction of PCB. (8) Anti radioactive ray design is not considered for the products listed here in. (9) Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. (10) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA should be used. (11) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (12) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (13) The LEDs must be soldered within seven days after opening the moisture-proof packing. (14) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (15) The appearance and specifications of the product may be modified for improvement without notice. SSC-GR202 SSCRevision 1.0 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.00) ~30E Humidity : 60%HR max. |
Price & Availability of SSC-GR202
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |